Updating psp go firmware
Every time you turn off your console (by holding the switch like 10 seconds) you will have to run the Fast Recovery utility to activate the CFW again.But If you have a PSP 1000/2000 it’s possible to make the CFW permanent using CIPL_Flasher, if your model is not supported it will tell you so.To open the Memory Stick slot cover, insert a fingernail or other small, flat object into the notch in the Memory Stick slot cover, and pull the slot cover out and away from the system.Insert the cropped edge of the Memory Stick Pro Duo into the PSP system with the lettered side facing up, and push the Memory Stick into place. To successfully install and use a Memory Stick Pro Duo with a PSP system, you must format it.Never put ISO files inside the PSP\GAME folder they will show as corrupted data.In 2005, Sony released the Play Station Portable hand-held game console in North America.When upgrading or changing the Memory Stick, the removal process is similar to the installation process.
Also note that you can likely minimize the problem of slow or stalled downloads by actually downloading the firmware update package on your PC or Mac. Here’s my article on the subject: Download Sony PSP firmware update Hope that’s useful. The co-worker i got it from states it hasn’t been turned on in like 6-7 years. Made the mistake of updating it to 6.61 apparently 6.60 is preferred if im not mistaken. Yesterday i was updating my psp to the new firmware version but it suddenly ran out of power and turned off. I have heard from many people that have unplugged their PSP accidentally during an update, got bored during the slow download, or had some other glitch interrupt a network update or processing a downloaded update just to end up with a completely dead Sony PSP device.
Now when i turn it on there is no response, just the power indicator light on. The only advice I can offer you and other people in this situation is to call Sony and talk to them about how lame it is that you can kill your expensive Playstation Portable device by a relatively random or unlucky event during a firmware update.
When prompted, confirm that you wish to format the Memory Stick.